- All DURA's Holland Type Swivel Coupler are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5031
- All types of Scaffolding couplers can be manufactured:
-
-
- All DURA's British Type Square Base Body Drop Forged Fixed Coupler are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5001C
- All types of Scaffolding couplers can be manufactured:
-
- All DURA'sForged Inner Joint Couplers are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5017A
- All types of Scaffolding couplers can be manufactured:
-
Popular Flat Base body British Drop Forged Double Coupler
- All DURA's British Type Drop Forged Double Couplers are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5001B
- All types of Scaffolding couplers can be manufactured:
- German Type Forged Swivel Coupler
- Italian Type Forged Double Coupler
- Brazil Type Pressed Double Coupler
- British Pressed Sleeve Coupler
-
- All DURA's Weld L-Plate Coupler are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5046
-
- All DURA's British Type Forged Double Couplers are certified as the EN74-1 & BS 1139-2 high-quality standard.
- Supplied for PRESCO, LAYHER, PERI, DELMON, etc. DURA is the Certified and Approved Scaffolding Couplers Supplier.
- Item No: DA-5001A
- All types of Scaffolding couplers can be manufactured:
- Japanese Type Steel Pressed Swivel Clamp
- Pressed Steel Double Couplers
- British Forged half Couplers
- German Type Forged half Couplers
-
-
Pressed scaffolding clamps of Korean and Japanese type are made of pressed steel with assembled bolt and 17mm hexagon nuts, produced by DURA SCAFFOLD in multi-size 42.7-48.6mm strictly meet the Korean and Japanese standards. These types of pressed scaffolding clamps are light-duty steel clamps, most widely used in Korea, Japan, and other Asia countries. Korean type scaffold clamps are a ninety-degree pressed steel body base plate, including Korean type pressed fixed clamps (Coupler to Coupler 90 degree) and swivel clamps (Coupler to Coupler 360 degree). Japanese type scaffold clamps are a 110-degree pressed steel body base plate, including Japanese type pressed steel fixed clamps (Coupler to Coupler 90 degree) and swivel clamps (Coupler to Coupler 360 degree).
-
Italian type scaffolding couplers by DURA SCAFFOLD, including pressed and forged two types of scaffolding couplers, which all are heavy pressing and heavy forging scaffolding couplers. Produced as the international standard EN74 and AS1576. These types of Italian type scaffolding couplers are very popular in the Italian construction market. With coupler accessories 21mm nut and 8.8-grade T-bot, available in electro-galvanized and Hot dip galvanized finish. Italian type pressed scaffolding double clamps and swivel clamps. Italian type drop forged scaffolding double couplers and swivel couplers.
-
American type forged scaffolding couplers are also called the USA forged scaffolding clamps, is the heaviest weight of forging scaffolding couplers, with thicker forged covers and bodies, more anti-slipping bars behind the covers, assembled with ball head bolt and 22mm hex flange nuts, which is widely used in North American and other regions. This type of USA forged couplers is mostly used to connect scaffolding tubes in dimension diameter 48.3mm, 60mm, and 89mm. American type forged couplers by DURA SCAFFOLD, including American type forged double couplers, American type forged swivel couplers. Weight and forged type can be designed and produced as customer's requests.
-
This type of German type forged scaffolding couplers is one of the heavy-duty anti-slipping forging scaffolding couplers, mainly used in Germany and other countries, with better resistance to slide and damage. German type forged scaffolding couplers manufactured by DURA SCAFFOLD, with 22mm hex flange nut, 8.8-grade heat-treated T-Bolt, both electro-galvanized and Hot-dip galvanized are all available. Totally produced as the EN74 standard. The solid-body construction enhanced strength and durability. DURA SCAFFOLD can supply 48.3mm X48.3mm German type forged double couplers, German type forged swivel couplers, and forged half couplers. Also OEM as customer's request.
-
The advanced and professional design of DURA SCAFFOLD pressed British steel couplers utilizes longer bodies and thicker steel plate with heavy-duty hinge construction. This ensures the highest level of durability plus the economies of long-term safe and efficient performance. Because of the high tensile steel material used so DURA’s pressed couplers meet the high international quality standard, including
- EN74-1 2005
- BS1139-2 (non-load bearing)
- AS1576.2 2009
- ISO9001 2008
-
- DURA EN 74-1:2005 British type Forged Scaffolding Couplers with T-Bolt spigot pins and washer baseplates for use in falsework and scaffolds. Connected with O.D 48.3mm scaffold tubes. Including 90 degrees forged scaffolding Double couplers and Forged Swivel Couplers.
- The DURA forged couplers' base body and two covers are drop forged with material Q235 carbon round steel bar. And couplers' accessories are 8.8-grade T-Bolt and Nut with heat treatment. Sturdy and durable, not easy to damage and fall off in scaffold buildings.
- All of the EN74 drop-forged Scaffolding Couplers are assemble with Large rivets and solid body construction for cruciform stiffness.
- Electro Zinc galvanized and Hot-dip Galvanized surface treatment are available for our EN74 standard Drop Forged Scaffolding Couplers.
-
Formwork Tie Rods are made of 45# or Q235 steel bars, ususlly from 1m to 6m length and it also can be cut, anchored, and coupled at any point and be adjusted to on-site requirements.
-
The DURA formwork accessories are all used to fix and assist the formworks in construction, just like tightening the tie rod, connecting the formworks and so on. These items include tie rods, formwork wing nuts, Anchor Nuts, Rapid Clamps, Washer Plates, Formwork Clips and etc. All can be designed and produced as requested. These are widely used in sheet pile wall assembly in harbor and dam construction, cross-linkings, tying back walls in deadman structures, positional stability of joint connections, corner joints and foundations etc.
-
Adjustable U shoring props are welded U head on the top to support formworks as the projects needed. The U head sizes are designed as the requested.
-
Heavy Duty shoring props use the ductile iron prop nut to make and fix the adjustment. Outter Pipe 60mm diameter and inner pipe 48mm diameter. Thickness from 1.5 to3.0mm can be made.
-
DURA Cup Nut Shoring Props also named Light duty shoring props, welded square base plate or flower base plate, using Pipe cup to make and fix the adjustment.
-
As one of the main Formwork products, SHORING PROPS are designed to support a range of formwork and falsework applications, floors, ceilings, openings and temporary beams. And the props height can be adjusted to fit for the project needs. HEAVY DUTY SHORING PROPS and CUP NUT PROPS are the normal props that used widely.
-
Dura Forged Double Couplers used to fasten two crossing pipes.
-
1. Easy quickly assembled and widely used in various constructions. 2. Different couplers can be supplied as requested, and brand can be stamped on couplers.
-
The Screw Jack Bases can be divide into Hollow Screw Jack Base and Solid Screw Jack Bases. All is used as a starting base for a scaffold. It is a adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable. The hollow screw main material is pipe.
-
DURA SCAFFOLDING ACCESSORIES includes Ringlock, Cuplock, kwikstage and other scaffolding accessories. Just like Ringlock leger end and rossette, or all can be widely used Jack Bases.All the scaffolding accessories are used and served by different scaffoling systems to meet customers' production demands. DURA also can produce as clients size and requests if drawings can be supplied.
-
Just as the name implies, The DURA Walk Through Frame system can allow workers walk directly. More convenient and easy seting up for construction.
-
1. Snap on locking pin, Flip locking pin, Drop locking Pin, Vangard locking pin available. 2 Powder Coated or Painting. 3.Dimension, surface, material and style can be specified.
-
- Types of H Frames and Walk Through Frames, accessories including cross brace, lock pins, caster wheel, jack base, walk steel board etc.
- High tensile steel to meet clients requirements.
- Powder Coated or Painted Surface Treatment
- Different locking pins avaliable for each type of the frame system.
-
- Material: High tensile steel
- Weight: 1.3kg
- Surface Treatment: Hot dip galvanized or Powered Coated.
-
- Material: High tensile steel
- Size: 230mm, 460mm, 690mm
- Surface Treatment: Hot-dip Galvanized or Powered Coated.
-
- Material: Q235 carbon steel
- Tube Size:48.3X2.5mm.
- Length: 1830mm, 2750mm, 3530mm, 3660mm
- Surface Treatment: Hot-dip Galvanized or Powered Coated.
-
- Material: Q235 carbon steel tube
- Tube Size:48.3X3.2
- Length: 1200mm, 1800mm, 2400mm
- Surface Treatment:Hot-dip Galvanized or Powered Coated
-
- Material: Q345/Q235
- Tube Size:48.3X3.2/4.0mm.
- Length: 0.5m,1.0m, 1.5m, 2.0m, 2.5m, 3.0m.
- Surface Treatment: Hot-dip Galvanized or Powered Coated
-
- Included by Standard, Ledgers, Diagonal Braces, Transoms, Steel planks
- High tensile steel "V" Pressing connection point.
- AU/UK Kwikstage Type
- Hot dip galvanized Powder Coated Surface Treatment
-
- Material: Q195
- Size: 910mm, 1220mm, 1520mm, 1830mm, 2130mm, 2440mm, 1740mm, 3050mm
- Surface Treatment: Pre-galvanized
-
- Material: Q235
- Size:565MM, 795MM, 1300MM, 1800MM
- Surface Treatment: HDG
-
- Material: Q235 steel
- Size: One board: 290mm Two board: 570mm Three board: 800mm
- Surface Treatment: Hot-dip Galvanized or Electro-glacanized.
-
- Material: Q235steel tube
- Tube Size:48.3X3.2mm.
- Swivel Blade Length: 1.8X1.5M, 1.8X2.0M, 2.5X1.5M, 3X2M.Swivel Clamp Brace Sizes: 5'X2M, 7'X2M, 8'X2M, 9'X2M, 10'X2M
- Surface Treatment: Hot-dip Galvanized or Electro-glacanized.
